Hyundai Santa Fe: Air conditioning System / Ambient Temperature Sensor. Description and operation

Hyundai Santa Fe (TM) 2019-2024 Service Manual / Heating,Ventilation And Air Conditioning / Air conditioning System / Ambient Temperature Sensor. Description and operation

Description

The ambient temperature sensor is located at the front of the condenser and detects ambient air temperature. It is a negative type thermistor; resistance will increase with lower temperature, and decrease with higher temperature.

The sensor output will be used for discharge temperature control, temperature regulation door control, blower motor level control, mix mode control and in-car humidity control.

•	If the ambient temperature is below 1.0°C (33.8°F), the A/C compressor will stop.

•	The compressor will operate manually.

Photo Sensor. Repair procedures

Inspection 1. Emit intensive light toward the photo sensor using a lamp, and check the output voltage change. 2...

Ambient Temperature Sensor. Repair procedures

Inspection 1. Check the resistance of the ambient temperature sensor between terminals 1 and 2 whether it changes by changing the ambient temperature...

Other information:

Hyundai Santa Fe (TM) 2019-2024 Service Manual: Joint Assembly (Transaxle side). Repair procedures

Removal • Drive shaft joints require special grease, so do not add any other type of grease. • When replacing the boot band, it must be a new one...

Hyundai Santa Fe (TM) 2019-2024 Service Manual: Power Seat Motor. Repair procedures

Inspection Power Seat Motor 1. Disconnect the connectors for each motor. (Refer to Body - "Front Seat Assembly") B : Rear height motor C : Front height motor D : Lumbar support motor (Horizontal) E : Lumbar supprot motor (Vertical) F : Recline motor 2...