Hyundai Santa Fe: Climate control additional features / Auto dehumidify

Hyundai Santa Fe (TM) 2019-2024 Owner's Manual / Convenience features / Climate control additional features / Auto dehumidify

To increase cabin air quality and reduce windshield misting, recirculation mode switches off automatically after about 5 to 30 minutes, depending on the outside temperature, and the air intake will change to fresh mode.

Turning Auto Dehumidify ON or OFF

Climate control system

To turn the Auto Dehumidify feature on or off, select Face level () mode and press the air intake control () button at least five times within three seconds. When Auto Dehumidify is turned on, the air intake control button indicator will blink 6 times. When turned off, the indicator will blink 3 times.

Infotainment system

Auto Dehumidify can be turned on and off by selecting 'Setup - Vehicle Settings - Climate - Automatic Ventilation - Auto Dehumidify’ from the infotainment system screen.

For detailed information, refer to the separately supplied infotainment system manual.

Auto defogging system

Auto defogging helps reduce the possibility of fogging up the inside of the windshield by automatically sensing the moisture on inside the windshield...

Recirculating air when washer fluid is used

Recirculation mode automatically activates to reduce any objectionable scent of the washer fluid from entering the cabin when the windshield washer is used...

Other information:

Hyundai Santa Fe (TM) 2019-2024 Owner's Manual: Cup holder

Cups or small beverages cups may be placed in the cup holders. WARNING Avoid abrupt starting and braking when the cup holder is in use to prevent spilling your drink. If hot liquid spills, you could be burned. Such a burn to the driver could cause loss of vehicle control resulting in an accident...

Hyundai Santa Fe (TM) 2019-2024 Owner's Manual: High Beam Assist Operation

Display and control After selecting ‘High Beam Assist’ in the Settings menu, High Beam Assist will operate by following the procedure below. - Place the headlight switch in the AUTO position and push the headlight lever towards the instrument cluster...