Hyundai Santa Fe: Tire Pressure Monitoring System (TPMS) / Check tire pressure

Hyundai Santa Fe (TM) 2019-2024 Owner's Manual / Emergency situations / Tire Pressure Monitoring System (TPMS) / Check tire pressure

You can check the tire pressure in the Warning mode on the cluster. Refer to the “LCD Display Modes” in chapter 4.
Tire pressure is displayed after a few minutes of driving after initial engine start up.
If tire pressure is not displayed when the vehicle is stopped, “Drive to display” message will appear. After driving, check the tire pressure.
The displayed tire pressure values may differ from those measured with a tire pressure gauge.
You can change the tire pressure unit in the User Settings mode on the instrument cluster.БЮ -- psi, kpa, bar

Tire Pressure Monitoring System (TPMS)

Tire pressure monitoring system

WARNING Over-inflation or under-inflation can reduce tire life, adversely affect vehicle handling, and lead to sudden tire failure that may cause loss of vehicle control resulting in an accident...

Other information:

Hyundai Santa Fe (TM) 2019-2024 Service Manual: Rear Power Mosfet. Repair procedures

Inspection 1. Turn the ignition switch ON. 2. Manually operate the control switch and measure the voltage of the blower motor. 3. Select the control switch to raise the voltage until it reaches high speed...

Hyundai Santa Fe (TM) 2019-2024 Service Manual: Components and components location

Categories

Power adjustment

The front seat can be adjusted by using the control switches located on the outside of the seat cushion. Before driving, adjust the seat to the proper position so that you can easily control the steering wheel, foot pedals and controls on the instrument panel.

WARNING

NEVER allow children in the vehicle unattended. The power seats are operable when the vehicle is turned off.