Hyundai Santa Fe: Auto Head Lamp Leveling Device / Head Lamp Leveling Switch. Repair procedures

Hyundai Santa Fe (TM) 2019-2025 Service Manual / Body Electrical System / Auto Head Lamp Leveling Device / Head Lamp Leveling Switch. Repair procedures

Inspection
1.
Disconnect the negative (-) battery terminal.
2.
Remove the crash pad lower panel.
(Refer to Body - "Crash Pad Lower Panel")
3.
Loosen the mounting screw, remove the crash pad garnish [LH] (A).

4.
Press the lock pin, separate the connector (A).

5.
Remove the rheostat switch (A) after loosening mounting screws.

Installation
1.
Install the rheostat switch.
2.
Install the crash pad garnish [LH]
3.
Install the crash pad lower panel.
4.
Connect the negative (-) battery terminal.

    Head Lamp Leveling Switch. Schematic diagrams

    ..

    Head Up Display System

    ..

    Other information:

    Hyundai Santa Fe (TM) 2019-2025 Owner's Manual: System operation


    Ventilation 1. Set the mode to the position. 2. Set the air intake control to the outside (fresh) air position. 3. Set the temperature control to the desired position. 4. Set the fan speed control to the desired speed. Heating 1. Set the mode to the position...

    Hyundai Santa Fe (TM) 2019-2025 Owner's Manual: Stowing the rear seat belt


    The rear seat belt buckles can be stowed in the pocket between the rear seatback and cushion when not in use. Routing the seat belt webbing through the rear seat belt guides will help keep the belts from being trapped behind or under the seats...

    Categories

    Vehicle Identification Number (VIN). Vehicle certification label. Tire specification and pressure label

    Vehicle Identification Number (VIN)

    The vehicle identification number (VIN) is the number used in registering your vehicle and in all legal matters pertaining to its ownership, etc.

    The number is punched on the floor under the passenger seat. To check the number, open the cover.

    read more


     
    Copyright © 2025 www.hsafe4.com