Hyundai Santa Fe: Hood / Hood Latch Release Handle. Repair procedures

Hyundai Santa Fe (TM) 2019-2024 Service Manual / Body (Interior and Exterior) / Hood / Hood Latch Release Handle. Repair procedures

Replacement

1.	Using a socket (B), remove the hood release handle (A).

To install, reverse removal procedure.

•	Make sure the hood latch cable is connected properly.

•	Make sure the hood locks / unlocks and opens / closes properly.

Hood Latch Release Handle. Components and components location

Hood Latch. Components and components location

Other information:

Hyundai Santa Fe (TM) 2019-2024 Owner's Manual: Instrument panel fuse replacement

1. Turn the vehicle off. 2. Turn all other switches off. 3. Open the fuse panel cover. 4. Refer to the label on the inside of the fuse panel cover to locate the suspected fuse location. 5. Pull the suspected fuse straight out. Use the removal tool (1) provided in the engine compartment fuses panel cover...

Hyundai Santa Fe (TM) 2019-2024 Service Manual: Heated Oxygen Sensor (HO2S). Description and operation

Description Heated Oxygen Sensor (HO2S) consists of zirconium and alumina and is installed both upstream and downstream of the Manifold Catalytic Converter. It varies in accordance with the air/fuel ratio. The sensor must be hot in order to operate normally...

Categories

Instrument panel overview

1. Instrument cluster
2. Driver’s front air bag
3. Engine Start/Stop button
4. Infotainment system
5. Hazard warning lamp switch
6. Climate control system
7. Shift button
8. ISG (Idle Stop and Go) button
9. Auto Hold button
10. Heated steering wheel button
11. Drive mode button
12. DBC (Downhill Brake Control) button
13. Parking Safety button
14. Parking/View button
15. Air ventilation seat button
16. Seat warmer
17. Passenger’s front air bag
18. Glove box
19. Wireless charging system pad
20. Cup holder
21. AC inverter
22. USB charger