Hyundai Santa Fe: Blower / Intake Actuator. Description and operation
The intake actuator is located at the blower unit. It regulates the intake door
by a signal from the control unit. Pressing the intake selection switch will
shift between recirculation and fresh air modes.
Replacement
1.
Remove the glove box.
(Refer to Body - "Glove Box")
2.
Remove the filter cover (A) by pressing the knob...
Other information:
We recommend that you consult an authorized HYUNDAI dealer to replace most vehicle
light bulbs. It is difficult to replace vehicle light bulbs because other parts
of the vehicle must be removed before you can get to the bulb. This is especially
true for removing the headlamp assembly to get to the bulb(s)...
Jump starting can be dangerous if done incorrectly. Follow the jump starting
procedure in this section to avoid serious injury or damage to your vehicle. If
in doubt about how to properly jump start your vehicle, we strongly recommend that
you have a service technician or towing service do it for you...
Categories

1. Instrument cluster
2. Driver’s front air bag
3. Engine Start/Stop button
4. Infotainment system
5. Hazard warning lamp switch
6. Climate control system
7. Shift button
8. ISG (Idle Stop and Go) button
9. Auto Hold button
10. Heated steering wheel button
11. Drive mode button
12. DBC (Downhill Brake Control) button
13. Parking Safety button
14. Parking/View button
15. Air ventilation seat button
16. Seat warmer
17. Passenger’s front air bag
18. Glove box
19. Wireless charging system pad
20. Cup holder
21. AC inverter
22. USB charger
read more