Hyundai Santa Fe: Convenience features / Integrated memory system
Integrated Memory System for the driver’s seat is provided to store and recall
the following memory settings with a simple button operation.
- Driver’s seat position
- Side View mirror position
WARNING
Never attempt to operate the integrated memory system while the vehicle is
moving.
This could result in loss of control, and an accident causing death, serious
injury, or property damage.
Information
- If the battery is disconnected, the memory settings will be erased.
- If integrated memory system does not operate normally, have the
system inspected by an authorized HYUNDAI dealer.
This system helps to protect your vehicle and valuables. The horn will sound
and the hazard warning lights will blink continuously if any of the following occur:
- A door is opened without using the smart key...
1. Shift to P (Park) while the Engine Start/Stop button is in the ON position.
2. Adjust the driver’s seat position, side view mirror position, steering wheel
position, instrument panel illumination intensity and head-up display height/brightness
to the desired position...
Other information:
Inspection
1.
Connect the battery voltage and check the blower motor rotation.
2.
If the blower motor does not operate well, substitute with a known-good
blower motor and check for proper operation...
Inspection
1.
Turn the ignition switch OFF.
2.
Disconnect the auto defogging connector.
3.
Verify that the auto defogging actuator operates to the open position
when connecting 12V to terminal 3 and grounding terminal 6...
Categories
Electric Power Steering (EPS) warning light
This warning light illuminates:
When you set the ignition switch or the Engine Start/Stop button to
the ON position.
- The electric power steering warning light illuminates for about 3 seconds
and then goes off.
Whenever there is a malfunction with the electric power steering.
If this occurs, have the vehicle inspected by an authorized HYUNDAI dealer.
read more