Hyundai Santa Fe: Convenience features / Manual climate control system
1. Fan speed control knob
2. Temperature control knob
3. Mode selection button
4. Front windshield defroster button
5. Rear window defroster button
6. Air conditioning button
7. Air intake control button
The rear window wiper and washer switch is located at the end of the wiper and
washer switch lever. Turn the switch to the desired position to operate the rear
wiper and washer...
1. Start the engine.
2. Set the mode to the desired position. To improve the effectiveness of heating
and cooling, select:
- Heating:
- Cooling:
3. Set the temperature control to the desired position...
Other information:
General Service Information
Protection of the Vehicle
Always be sure to cover fenders, seats, and floor areas prior to beginning work.
•
The support rod must be inserted into the hole near the edge
of the hood whenever you inspect the engine compartment to prevent
the hood from falling and causing possible injury...
Description
Based on information from various sensors, the ECM can calculate the fuel amount
to be injected. The fuel injector is a solenoid-operated valve and the fuel
injection amount is controlled by length of injection time. The ECM controls
each injector by grounding the control circuit...
Categories
Engine oil pressure warning light
This warning light illuminates:
When the engine oil pressure is low.
If the engine oil pressure is low:
1. Drive carefully to the nearest safe location and stop your vehicle.
2. Turn the engine off and check the engine oil level (For more details, refer
to “Engine Oil” section in chapter 9). If the level is low, add oil as required.
read more