Hyundai Santa Fe: If you have a flat tire (with Tire Mobility Kit) / Notes on the safe use of the Tire Mobility Kit
- Park your car at the side of the road so that you can work with the Tire
Mobility Kit away from moving traffic.
- To be sure your vehicle will not move, even when you’re on fairly level
ground, always set your parking brake.
- Only use the Tire Mobility Kit for sealing/inflation passenger car tires.
Only punctured areas located within the tread region of the tire can be sealed
using the tire mobility kit.
- Do not use on motorcycles, bicycles or any other type of tires.
- When the tire and wheel are damaged, do not use Tire Mobility Kit for
your safety.
- Use of the Tire Mobility Kit may not be effective for tire damage larger
than approximately 4 mm (16 inch). Please contact the nearest HYUNDAI dealer
if the tire cannot be made roadworthy with the Tire Mobility Kit.
- Do not use the Tire Mobility Kit if a tire is severely damaged by driving
run flat or with insufficient air pressure.
- Do not remove any foreign objects such as nails or screws that have penetrated
the tire.
- Provided the car is outdoors, leave the engine running. Otherwise operating
the compressor may eventually drain the car battery.
- Never leave the Tire Mobility Kit unattended while it is being used.
- Do not leave the compressor running for more than 10 minutes at a time
or it may overheat.
- Do not use the Tire Mobility Kit if the ambient temperature is below -22°F
(30°C).
- In case of skin contact with the sealant, wash the area thoroughly with
plenty of water. If the irritation persists, seek medical attention.
- In case of eye contact with the sealant, flush your eyes for at least
15 minutes. If the irritation persists, seek medical attention.
- In case of swallowing the sealant, rinse the mouth and drink plenty of
water. However, never give anything to an unconscious person and seek medical
attention immediately.
- Long time exposure to the sealant may cause damage to bodily tissue such
as kidney, etc.
With the Tire Mobility Kit you stay mobile even after experiencing a tire puncture.
The compressor and sealing compound system effectively and comfortably seals most
punctures in a passenger car tire caused by nails or similar objects and reinflates
the tire...
1. Speed restriction label
2. Sealant and sealant bottle
3. Connection hose of compressor and tire
4. Connector and cable for connection of power outlet
5...
Other information:
Description
Due to the considerably more frequent occurrence of starting operations, the
electrical load that occurs often leads to voltage dips in the vehicle network.In
order to stabilize the power supply for certain voltage-sensitive electrical
components, a DC/DC converter is used in conjunction with the ISG function...
SCC/HDA/LKA
This mode displays the state of the Smart Cruise Control (SCC), Highway Driving
Assist (HDA) and Lane Keeping Assist (LKA).
Driver Attention Warning
This mode displays the state of the Driver Attention Warning (DAW).
For more details, refer to “Driver Attention Warning (DAW)” in chapter 7...
Categories
WARNING
To reduce the risk of an air bag deploying unexpectedly and causing serious
injury or death:
Do not hit or allow any objects to impact the locations where air
bags or sensors are installed.
Do not perform maintenance on or around the air bag sensors. If
the location or angle of the sensors is altered, the air bags may deploy when
they should not or may not deploy when they should.
Installing bumper guards with nongenuine Hyundai or non-equivalent
parts may adversely affect the collision and airbag deployment performance.
Press the Engine Start/Stop button to the OFF or ACC position and
wait for 3 minutes when the vehicle is being towed to prevent inadvertent air
bag deployment.
Have all air bag repairs performed by an authorized HYUNDAI dealer.
read more