Hyundai Santa Fe: Automatic Transaxle Control System / Output Speed Sensor. Specifications

Hyundai Santa Fe (TM) 2019-2025 Service Manual / Automatic Transaxle System (SBC) / Automatic Transaxle Control System / Output Speed Sensor. Specifications

Specifications

▷ Type : Hall effect sensor

▷ Specifications

Items		Specifications
Operation condition [°C(°F)]		(-40 to 150) -40 to 302
Output voltage(V)	High	1.18 - 1.68
	Low	0.59 - 0.84

Output Speed Sensor. Description and operation

Description The output speed sensor is a vital unit that measures the rate of rotation of the transaxle's turbine shaft and output shaft, and delivers the readings to the TCM...

Output Speed Sensor. Repair procedures

Inspection • Refer to the DTC manual for the check procedure...

Other information:

Hyundai Santa Fe (TM) 2019-2025 Owner's Manual: Blind-Spot View Monitor (BVM)

Blind-Spot View Monitor displays the rear blind spot area of the vehicle in the cluster when the turn signal is turned on to help change lanes. Detecting sensor [1], [2] : SVM-side view camera (camera located at bottom of the mirror) Refer to the picture above for the detailed location of the detecting sensors...

Hyundai Santa Fe (TM) 2019-2025 Service Manual: Troubleshooting

Failure Diagnosis 1. In principle, ESP and TCS controls are prohibited in case of ABS failure. 2. When ESP or TCS fails, only the failed system control is prohibited. 3...

Categories

Instrument panel overview

1. Instrument cluster
2. Driver’s front air bag
3. Engine Start/Stop button
4. Infotainment system
5. Hazard warning lamp switch
6. Climate control system
7. Shift button
8. ISG (Idle Stop and Go) button
9. Auto Hold button
10. Heated steering wheel button
11. Drive mode button
12. DBC (Downhill Brake Control) button
13. Parking Safety button
14. Parking/View button
15. Air ventilation seat button
16. Seat warmer
17. Passenger’s front air bag
18. Glove box
19. Wireless charging system pad
20. Cup holder
21. AC inverter
22. USB charger