Hyundai Santa Fe (TM): Tail Gate / Repair procedures

Hyundai Santa Fe (TM) 2019-2023 Service and Repair Manual / Body (Interior and Exterior) / Tail Gate / Repair procedures

Adjustment
1.
Place the car on a flat surface and check whether the body and trunk lid are well-aligned.
2.
After loosening the tailgate hinge (A) mounting bolt, adjust the tailgate by moving it up and down or from side to side.
3.
Adjust the gap between the tailgate and body by turning the tailgate overslam bumpers (B).
4.
After loosening the tailgate striker (C) mounting bolts, adjust the striker by moving it back and forth or from side to side and then tighten the mounting bolts.
5.
Make sure the tailgate opens or closes properly.

    Component Location 1. Tailgate assembly

    Other information:

    Hyundai Santa Fe (TM) 2019-2023 Service and Repair Manual: Blower Unit. Components and components location

    Components Location 1. Blower unit assembly Components 1. Blower unit assembly 2. Inlet case [LH] 3. Inlet seal 4. Inlet case [RH] 5. Intake actuator 6.

    Hyundai Santa Fe (TM) 2019-2023 Service and Repair Manual: Rear Power Mosfet. Repair procedures

    Inspection 1. Turn the ignition switch ON. 2. Manually operate the control switch and measure the voltage of the blower motor. 3. Select the control switch to raise the voltage until it reaches high speed.

    Categories

     
    Copyright В© 2025 www.hsafe4.com - 0.0123