Hyundai Santa Fe: SRSCM / Side Impact Sensor (SIS). Components and components location
1. Gravity Side
Impact Sensor [G-SIS(B-Pillar)]
2. Gravity Side Impact Sensor [G-SIS(C-Pillar)]
|
3. Front Pressure
Side Impact Sensor (P-SIS)
|
Description
The Side Impact Sensor (SIS) system consists of two kinds of side impact sensor
which are installed at each center of the front door module (left and right)
and two rear sensors which are installed in the rear pillar (left and right)...
Removal
•
Removal of the airbag must be performed according to the precautions/procedures
described previously...
Other information:
Your vehicle is equipped with a side air bag in each front seat. The purpose
of the air bag is to provide the vehicle’s driver and the front passenger with additional
protection than that offered by the seat belt alone.
The side air bags are designed to deploy during certain side impact collisions,
depending on the crash severity, angle, speed and point of impact...
Removal and installation
•
Be careful not to damage the parts located under the vehicle
(floor under cover, fuel filter, fuel tank and canister) when
raising the vehicle using the lift...
Categories
1. Inside door handle
2. Power window switches
3. Power window lock button/Electronic child safety lock button
4. Side view mirror folding button
5. Side view mirror control switch
6. Central door lock switch
7. Instrument panel illumination control switch
read more