Hyundai Santa Fe: Hydraulic System / SS-A Solenoid Valve (ON/OFF). Description and operation

Hyundai Santa Fe (TM) 2019-2025 Service Manual / Automatic Transaxle System (SBC) / Hydraulic System / SS-A Solenoid Valve (ON/OFF). Description and operation

Description
SS-A solenoid valve is attached to the valve body and is an on/off solenoid valve that is used to change gears.
SS-A Solenoid valve(ON/OFF) is installed at valve body.

    Overdrive Clutch Control Solenoid Valve (OD/C_VFS). Repair procedures

    Inspection    • Refer to the DTC manual for the check procedure...

    SS-A Solenoid Valve (ON/OFF). Components and components location

    Component Location (1)_Valve Body Cover 1. Valve Body Cover 2. Valve Body Cover Gasket 3. Solenoid Valve Connector Component Location (2)_Solenoid Valve 1...

    Other information:

    Hyundai Santa Fe (TM) 2019-2025 Owner's Manual: If the engine will not start


    Be sure to shift the gear to N (Neutral) or P (Park). The engine starts only when the gear is in N (Neutral) or P (Park). Turn on the interior light. If the light dims or goes out when you operate the starter, the battery is drained. See instructions for “Jump Starting” provided in this chapter...

    Hyundai Santa Fe (TM) 2019-2025 Service Manual: Front Door Inside Handle. Repair procedures


    Replacement 1. Remove the front door trim. (Refer to Front Door - "Front Door Trim") 2. After loosening the mounting screws, remove the front door inside handle (A)...

    Categories

    Vehicle Identification Number (VIN). Vehicle certification label. Tire specification and pressure label

    Vehicle Identification Number (VIN)

    The vehicle identification number (VIN) is the number used in registering your vehicle and in all legal matters pertaining to its ownership, etc.

    The number is punched on the floor under the passenger seat. To check the number, open the cover.

    read more


     
    Copyright © 2025 www.hsafe4.com