Hyundai Santa Fe: Navigation-based Smart Cruise Control (NSCC) / System settings

Hyundai Santa Fe (TM) 2019-2024 Owner's Manual / Driver assistance system / Driving Convenience / Navigation-based Smart Cruise Control (NSCC) / System settings

Setting functions for the system

With the engine on, select ‘Driver Assistance → Driving Convenience → Auto Highway Speed Control (or Auto motorway speed control)’ from the Settings menu to turn on Navigationbased Smart Cruise Control and deselect to turn off the system.

Highway Curve Zone Auto Slowdown

With the engine on, select ‘Driver Assistance → Driving Convenience → Highway Auto Curve Slowdown (or Curve slowdown (motorway))’ from the Settings menu to turn on Highway Curve Zone Auto Slowdown and deselect to turn off the function.

Information

When there is a problem with Navigationbased Smart Cruise Control, the system cannot be set from the Settings menu.

Navigation-based Smart Cruise Control (NSCC)

Navigation-based Smart Cruise Control will help automatically adjust vehicle speed when driving on highways (or motorways) by using road information from the navigation system while Smart Cruise Control is operating...

System operation

Operating conditions Navigation-based Smart Cruise Control is ready to operate if all of the following conditions are satisfied: Smart Cruise Control is operating Driving on main roads of highways (or motorways) Information For more details on how to operate Smart Cruise Control, refer to “Smart Cruise Control (SCC)” section in chapter 7...

Other information:

Hyundai Santa Fe (TM) 2019-2024 Owner's Manual: Manual climate control system

To defog inside windshield 1. Select any fan speed except “0” position. 2. Select the desired temperature. 3. Press the defroster button (). 4. The outside (fresh) air will be selected automatically. Additionally, the air conditioning (if equipped) will automatically operate if the mode is selected to the position...

Hyundai Santa Fe (TM) 2019-2024 Service Manual: Rear Glass. Repair procedures

Removal • In order to remove rear glass, use tools as follows shown in the picture. [Tools block diagram] ① Square wire ② Insert type wire grip [Tools assembly diagram] • Tighten square wire ① inserting it in the hole of Insert type wire grip ② 1...