Hyundai Santa Fe: Rear View Monitor (RVM) / System settings
Camera settings
.png)
- You can change Rear View Monitor ‘Display Contents’ or ‘Display Settings’
by touching the setup icon (
) on
the screen while Rear View Monitor is operating, or selecting ‘Driver Assistance
→ Parking Safety → Camera Settings’ from the Settings menu while the engine
is on.
- In the Display Contents, you can change settings for ‘Rear View’, and
in the Display Settings, you can change the screen’s ‘Brightness’ and ‘Contrast’.
Rear View Monitor will show the area behind the vehicle to assist you when parking
or backing up.
Camera
[1] : Rear view camera
Refer to the picture above for the detailed location of the camera...
Operating button
Parking/View button
Press the Parking/View button (1) to turn on Rear View Monitor.
Press the button again to turn off the system.
Rear view
Operating conditions
Shift the gear to R (Reverse), the image will appear on the screen...
Other information:
The rear seats are equipped with head restraint in all the seating positions
for the passenger’s safety and comfort.
Adjusting the height up and down
To raise the head restraint:
1. Pull it up to the desired position (1).
To lower the head restraint:
1...
Troubleshooting
Symption
Suspect area
Remedy
Engine misfire with abnormal internal lower engine noises.
Worn crankshaft bearings
Loose or out of specification engine flywheel
Replace the crankshaft and bearings as required...
Categories
Vehicle Identification Number (VIN)

The vehicle identification number (VIN) is the number used in registering your
vehicle and in all legal matters pertaining to its ownership, etc.
The number is punched on the floor under the passenger seat. To check the number,
open the cover.
read more