Hyundai Santa Fe: Hydraulic System / Torque Converter Control Solenoid Valve (T/CON_VFS). Specifications

Hyundai Santa Fe (TM) 2019-2025 Service Manual / Automatic Transaxle System (SBC) / Hydraulic System / Torque Converter Control Solenoid Valve (T/CON_VFS). Specifications

Specifications

▷ Control type : Normally low type

Shape	Items	Specifications
	Control current [mA]	0 - 850
	Supply pressure [kpa (kgf/cm², psi)]	539.36 (5.5, 78.23)
	Control pressure [kpa (kgf/cm², psi)]	0-519.75 (0-5.3, 0-75.38)
	Internal resistance(Ω)	4.8 - 5.4

Torque Converter Control Solenoid Valve (T/CON_VFS). Components and components location

Component Location (1)_Valve Body Cover 1. Valve Body Cover 2. Valve Body Cover Gasket 3. Solenoid Valve Connector Component Location (2)_Solenoid Valve 1...

Torque Converter Control Solenoid Valve (T/CON_VFS). Repair procedures

Inspection • Refer to the DTC manual for the check procedure...

Other information:

Hyundai Santa Fe (TM) 2019-2025 Service Manual: Rear Console Cover. Repair procedures

Replacement • Put on gloves to prevent hand injuries. • When removing with a flat-tip screwdriver or remover, wrap protective tape around the tools to prevent damage to components...

Hyundai Santa Fe (TM) 2019-2025 Owner's Manual: Remote key precautions

The remote key will not work if any of the following occur: The key is in the ignition switch. You exceed the operating distance limit (about 10 m [30 feet]). The remote key battery is weak. Other vehicles or objects may be blocking the signal. The weather is extremely cold...