Hyundai Santa Fe (TM): Driver Parking Assistance System / Troubleshooting

Troubleshooting
Diagnosis with Diagnostic tool
1.
In the body electrical system, failure can be quickly diagnosed by using the vehicle diagnostic system (Diagnostic tool).
The diagnostic system (Diagnostic tool) provides the following information.
1)
Fault Code Searching : Checking failure and code number (DTC)
2)
Data Analysis : Checking the system input/output data state
3)
Actuation test : Checking the system operation condition
4)
S/W Management : Controlling other features including system option setting and zero point adjustment
2.
Connect the cable of Diagnostic tool to the data link connector in driver side crash pad lower panel, and turn on the Diagnostic tool.
3.
If diagnose the vehicle by Diagnostic tool, select "DTC Analysis" and "Vehicle".

4.
If check current status, select the "Data Analysis" .

5.
Select "ADAS_PRK", if you want to check current data of Driver parking assistance system.

Variant Coding Procedures
1.
Connect the cable of Diagnostic tool to the data link connector in driver side crash pad lower panel, and turn on the Diagnostic tool.
2.
Select the 'S/W Management' and 'Car model'.

3.
Select the 'Advanced Driver Assistance Systems_Parking' and Variant Coding.

    Description ADAS_PRK is a unit that controls the functions required for ADAS parking. If the ADAS_PRK is applied, the parking distance warning function is also controlled by the ADAS_PRK.

    Components and Components Location

    Other information:

    Hyundai Santa Fe (TM) 2019-2023 Service and Repair Manual: PTC Heater (Diesel only). Description and operation

    Description The PTC (Positive Temperature Coefficient) heater is installed at the exit or the backside of the heater core. The PTC heater is an electric heater using a PTC element as an auxiliary heating device that supplements deficiency of interior heat source in highly effective diesel engine.

    Hyundai Santa Fe (TM) 2019-2023 Service and Repair Manual: Heater & A/C Control Unit (Manual). Repair procedures

    Replacement 1. Disconnect the negative (-) battery terminal. 2. Remove the console upper cover (A). 3. Press the lock pin, separate the console upper cover connectors (A).

    Categories

     
    Copyright В© 2025 www.hsafe4.com - 0.0146