Hyundai Santa Fe: Hydraulic System / 26 Brake Control Solenoid Valve (26/B_VFS). Description and operation

Hyundai Santa Fe (TM) 2019-2025 Service Manual / Automatic Transaxle System (SBC) / Hydraulic System / 26 Brake Control Solenoid Valve (26/B_VFS). Description and operation

Description
26 brake control solenoid valve(26/B_VFS) is attached to the valve body.
This variable force solenoid valve directly controls the hydraulic pressure inside the 26Brake.

    Torque Converter Control Solenoid Valve (T/CON_VFS). Repair procedures

    Inspection    • Refer to the DTC manual for the check procedure...

    26 Brake Control Solenoid Valve (26/B_VFS). Components and components location

    Component Location (1)_Valve Body Cover 1. Valve Body Cover 2. Valve Body Cover Gasket 3. Solenoid Valve Connector Component Location (2)_Solenoid Valve 1...

    Other information:

    Hyundai Santa Fe (TM) 2019-2025 Owner's Manual: Temperature control


    The temperature will increase by pushing the knob upward. The temperature will decrease by pushing the knob downward. Adjusting the driver and passenger side temperature equally Press the “SYNC” button to adjust the driver and passenger side temperature equally...

    Hyundai Santa Fe (TM) 2019-2025 Service Manual: Repair procedures


    Inspection Check it by the procedure below to see if the function of the ECM is normal. 1. Turn the ignition key to the "ON" position. 2. Cover the forward facing sensor...

    Categories

    Vehicle Identification Number (VIN). Vehicle certification label. Tire specification and pressure label

    Vehicle Identification Number (VIN)

    The vehicle identification number (VIN) is the number used in registering your vehicle and in all legal matters pertaining to its ownership, etc.

    The number is punched on the floor under the passenger seat. To check the number, open the cover.

    read more


     
    Copyright © 2025 www.hsafe4.com