Hyundai Santa Fe: Keyless Entry And Burglar Alarm / Components and components location

Hyundai Santa Fe (TM) 2019-2024 Service Manual / Body Electrical System / Keyless Entry And Burglar Alarm / Components and components location

Component Location

1. Hood switch
2. Burglar horn
3. Intergrated Body Control Unit (IBU)
4. Key warning switch
5. Front door lock actuator & switch
6. Rear door lock actuator & switch
7. Tailgate open switch

    Description and operation

    Description Burglar Alarm State [B/A State] B/A State Description DISARM 1) In "DISARM" state, no vehicle start inhibition...

    Specifications

    Specification Item Specification Power source 3V Operating temperature -20°C to +60°C (-4°F to- +140°F) RF Modulation FSK LF Modulation ASK RF frequency 433...

    Other information:

    Hyundai Santa Fe (TM) 2019-2024 Service Manual: Positive Crankcase Ventilation (PCV) Valve. Repair procedures


    Removal 1. Remove the cylinder head cover. (Refer to Engine Mechanical System - "Cylinder Head Cover") Installation 1. Install in the reverse order of removal...

    Hyundai Santa Fe (TM) 2019-2024 Service Manual: Repair procedures


    Removal 1. Prior to replacing the 4WD ECU, check the 4WD ECU's clutch learing with the diagnostic tool. (Refer to 4WD Control System - "Repair Procedures") 2. Turn OFF ignition switch and the disconnect the negative (-) battery cable...

    Categories

    Vehicle Identification Number (VIN). Vehicle certification label. Tire specification and pressure label

    Vehicle Identification Number (VIN)

    The vehicle identification number (VIN) is the number used in registering your vehicle and in all legal matters pertaining to its ownership, etc.

    The number is punched on the floor under the passenger seat. To check the number, open the cover.

    read more


     
    Copyright © 2024 www.hsafe4.com