Hyundai Santa Fe: Integrated Body Control Unit (IBU) / Components and components location

Hyundai Santa Fe (TM) 2019-2024 Service Manual / Body Electrical System / Integrated Body Control Unit (IBU) / Components and components location

Components (1)
With Smart Key

Connector Pin Information
No
Connector A
Connector B
Connector C
1
Fuel door release switch_input
GND_ECU
Front wiper relay (Low)_output
2
Fuel door open switch_input
PDW-F power_output
ESCL (+)_output
3
GND_Power
ESCL (-)_output
Start relay_output
4
PDW-R_Power_Output
Front wiper high relay_output
IGN1 relay_output
5
EMS ECU wake up_output
PDW-R switch IND_output
Immobilizer antenna power_output
6
Rear washer switch_input
P-Position_input
Immobilizer antenna ground_output
7
LIN4 (Rear seat remind)
-
-
8
P_CAN (Low)
Rear view switch_input
Driver outside handle antenna(+)_output
9
P_CAN (High)
-
Interior1 antenna (+)_output
10
-
Wheel speed sensor_input
Front bumper antenna (+)_output
11
B_CAN (Low)
-
Tailgate3 antenna(+)_output
12
B_CAN (High)
3rd line sheet belt indicator RH_output
-
13
SSB switch_input
-
Passenger outside handle antenna(+)_output
14
Driver handle antenna switch_input
Rear center seat belt indicator_output
Immobilizer K-Line
15
P-Position_input (PWM)
Fuel door open relay_output
Bumper antenna (+)_output
-
16
Fog switch_input
-
Interior antenna2(+)_output
17
Light switch_input
Auto light sensor signal_input
IGN2_input
18
Front wiper INT volume switch_input
Auto light sensor power_output
IGN1_input
19
Multifunction switch_input
ATM solenoid_output
IGN2 relay_output
20
Assist mirror unfolding switch_oupout
Puddle pocket lamp_output
Battery_power
21
Assist mirror (Horizontal)_output
-
Brake switch_input
22
Front washer switch_input
SSB ring illumination_output
Start feedback_input
23
Front wiper low switch_Input
piezo buzzer_output
-
24
LIN1 (PDW)
SSB symbol illumination_output
Driver outside handle antenna (-)_output
25
LIN2 (Safety ECU)
Fuel door close relay_output
Interior1 (-)_outputDriver outside handle antenna (-)_output
26
LIN3 (Rain sensor)
Wiper power relay_output
Front bumper antenna (-)_output
27
PDW-R power_input
Rear seat belt indicator RH_output
Passenger outside handle antenna (-)_output
28
PDW_input
Rear seat belt indicator LH_output
ESCL COM
29
SSB switch1_input
3rd line sheet belt indicator LH_output
Tailgate3 antenna(-)_output
30
ESCL unlock_input
Rear wiper relay_output
ESCL Enable_output
31
Passenger outside handle switch_input
Auto light sensor ground_output
Bumper antenna (-)_output
32
PDW switch_input
Wiper parking switch_input
Interior antenna2 (-)_output
33
Sun roof Status_input

ACC_input
34
Head lamp switch_input
Mirror power_input
35
Front wiper switch_input
ACC relay_output
36
Rear wiper switch_input
Battery (+)_ECU
37
Assist mirror folding RH_output

38
Assist mirror (Vertical)_output

Without Smart Key

Connector Pin Information
No
Connector A
Connector B
Connector C
1
Fuel door release switch_input
GND_ECU
Front wiper relay (Low)_output
2
Fuel door open switch_input
PDW-F power_output
-
3
GND_Power
-
-
4
PDW-R_Power_Output
Front wiper high relay_output
-
5
EMS ECU wake up_output
PDW-R switch IND_output
Immobilizer antenna power_output
6
Rear washer switch_input
-
Immobilizer antenna ground_output
7
LIN4
-
Kline_IMMO
8
P_CAN (Low)
-
-
9
P_CAN (High)
-
-
10
-
-
-
11
B_CAN (Low)
-
-
12
B_CAN (High)
3rd line sheet belt indicator RH_output
-
13
-
-
-
14
Key inter lock siwtch_input(PWM)
Rear center seat belt indicator_output
-
15
Key inter lock siwtch_input
Fuel door open relay_output
-
16
Fog switch_input
-
-
17
Light switch_input
Auto light sensor signal_input
IGN2_input
18
Front wiper INT volume switch_input
Auto light sensor power_output
IGN1_input
19
Multifunction switch_input
ATM solenoid_output
-
20
Aisst mirror unfolding switch_oupout
-
Battery_power
21
Right side mirror (Horizontal)_output
-
Brake switch_input
22
Front washer switch_input
Key hole illumination_output
-
23
Front wiper low switch_Input
-
Start relay_output
24
LIN1 (PDW)
-
Start inhibit relay_output
25
LIN2 (Safety ECU)
-
Key solenoid_output
26
LIN3 (Rain sensor)
Fuel door close relay_output
-
27
PDW-R power_input
Rear seat belt indicator RH_output
-
28
-
Rear seat belt indicator LH_output
-
29
Key in switch_input
3rd line sheet belt indicator LH_output
-
30
RVM switch_input
Rear wiper relay_output
-
31
-
Auto light sensor ground_output
-
32
PDW switch_input
Wiper parking switch_input
-
33
Sun roof Status_input

ACC_input
34
Head lamp switch_input
Mirror power_input
35
Front wiper switch_input
-
36
Rear wiper switch_input
Battery (+)_ECU
37
Mirror folding RH_output

38
Assist Mirror (Vertical)_output


    Description and operation

    Description Body Control Module Controls The Followings – Wiper & Washer Control – Defroster Control – Driving Control – Tailgate Control – Window Control – Interior Control – Exterior Control – Panic alarm Control – MTS – Flasher output Control – Door lock/unlock Control – Burglar alarm Control – Remote start Control – UMS(User Mode Setting) Control – Gateway/ Diagnosis Integrated Body Control Unit (IBU) Integrated body control unit has integrated several functions including body control module (IBU), smart key unit (SMK), and tire pressure monitoring system (TPMS)...

    Specifications

    Specifications Items Specifications Rated voltage DC 12V Operating voltage DC 9 - 16V Operating temperature -30°C to 85°C (-22°F to 185°F) Parastic current Keyless type : 5...

    Other information:

    Hyundai Santa Fe (TM) 2019-2024 Service Manual: Engine Coolant Temperature Sensor (ECTS). Description and operation


    Description Engine Coolant Temperature Sensor (ECTS) is located in the engine coolant passage of the cylinder head for detecting the engine coolant temperature. The ECTS uses a thermistor whose resistance changes with the temperature...

    Hyundai Santa Fe (TM) 2019-2024 Service Manual: Automatic Transaxle. Repair procedures


    Removal    • Be careful not to damage the parts located under the vehicle (floor under cover, fuel filter, fuel tank and canister) when raising the vehicle using the lift...

    Categories

    Air bag collision sensors

    WARNING

    To reduce the risk of an air bag deploying unexpectedly and causing serious injury or death:

    Do not hit or allow any objects to impact the locations where air bags or sensors are installed. Do not perform maintenance on or around the air bag sensors. If the location or angle of the sensors is altered, the air bags may deploy when they should not or may not deploy when they should. Installing bumper guards with nongenuine Hyundai or non-equivalent parts may adversely affect the collision and airbag deployment performance. Press the Engine Start/Stop button to the OFF or ACC position and wait for 3 minutes when the vehicle is being towed to prevent inadvertent air bag deployment. Have all air bag repairs performed by an authorized HYUNDAI dealer.

    read more


     
    Copyright © 2024 www.hsafe4.com