| Component Location |

| 1. Fender assembly |
Replacement • When removing the fender, wrap protective tape around a screwdriver or remover not to damage components • Put on gloves to prevent hand injuries • When removing the clips, use a clip remover.
Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the crash pad lower pannel. (Refer to Body - "Crash Pad Lower Panel") 3. Loosen the mounting screw and remove the crash pad garnish [LH] (A).
Troubleshooting 1) After replacing controller, always check that the system operates properly. 2) If the failure persists after replacing the controller, do not replace th