Hyundai Santa Fe: Airbag Module / Curtain Airbag (CAB) Module. Description and operation
Curtain airbags are installed inside the headliner (LH and RH) and protect the
driver and passenger from danger when a side crash occurs. The SRSCM determines
deployment of the curtain airbag by using the side impact sensor (SIS) signal.
•
|
Never attempt to measure the circuit resistance of the airbag
module even if you are using a specified tester. If the circuit
resistance is measured with a tester, accidental airbag deployment
will result in serious personal injury.
|
|
Removal
1.
Disconnect the battery negative cable and wait for at least 3 minutes
before beginning work.
2...
Other information:
Inspection
•
Refer to the DTC manual for the check procedure.
Removal
•
Be careful not to damage the parts located under the vehicle
(floor under cover, fuel filter, fuel tank and canister) when
raising the vehicle using the lift...
Inspection
Tailgate normal operation transmit / receive process
•
FOB key Switch : FOB key Switch → BMC / SMK → CAN communication
→ PTG Module
•
Driver Switch : Driver Switch → Wiring → PTG Module
•
Outer Switch : Outer Switch → Wiring → SJB → CAN communication
→ PTG Module
① Press the power tailgate open switch
② Transmit / receive power tailgate open signal via CAN communication and wiring
③ Power tailgate open
•
The operation of the power tailgate is activated by mutual communication
with the vehicle's module and switch...
Categories
Engine oil pressure warning light
.png)
This warning light illuminates:
When the engine oil pressure is low.
If the engine oil pressure is low:
1. Drive carefully to the nearest safe location and stop your vehicle.
2. Turn the engine off and check the engine oil level (For more details, refer
to “Engine Oil” section in chapter 9). If the level is low, add oil as required.
read more