Hyundai Santa Fe: Electro Chromic Inside Rear View Mirror / Description and operation
The ECM (Electro Chromatic inside rear view Mirror) is intended dim the reflecting
light in the rear view mirror. The forward facing sensor detects brightness
of the surroundings, while the rearward looking sensor is for the light from
the rear. The strength of the light in the rear sensor is used by the mirror
to adjust the shading. It ranges from 7 to 85%. When the reverse gear is engaged,
it stops functioning.
1. |
The forward facing sensor sees if the brightness of the surroundings
is low enough for the mirror to operate its function.
|
2. |
The rearward looking sensor detects glaring of the reflecting light
from a vehicle behind.
|
3. |
The ECM is darkened to the level as determined by the rearward looking
sensor. When the glaring is no longer detected, the mirror stops functioning.
(1. LED indicator , 2. ON/OFF Switch , 3. Rearward looking sensor ,
4. Forward looking sensor )
|
Automatic-dimming Function |
To protect your vision during nighttime driving, your mirror will automatically
dim upon detecting glare from the vehicles traveling behind you. The auto-dimming
function can be controlled by the Dimming ON/OFF Button :
1. |
Pressing and holding the Feature Control button for more than 3 but
less than 6 seconds turns the auto-dimming function OFF which is indicated
by the green Status Indicator LED turning off.
|
2. |
Pressing and holding the Feature Control button again for more than
3 but less than 6 seconds turns the auto-dimming function ON which is
indicated by the green Status Indicator LED turning on.
The mirror defaults to the "ON" position each time the vehicle
is started.
|
|
Other information:
Replacement
•
When installing the belt, make sure not to damage the pretensioner.
1.
Remove the front anchor seat belt (A)...
Instrument panel fuse panel
Inside the fuse/relay box cover, you can find the fuse/relay label describing
fuse/ relay names and ratings.
Information
Not all fuse panel descriptions in this manual may be applicable to your vehicle;
the information is accurate at the time of printing...
Categories
Electric Power Steering (EPS) warning light
This warning light illuminates:
When you set the ignition switch or the Engine Start/Stop button to
the ON position.
- The electric power steering warning light illuminates for about 3 seconds
and then goes off.
Whenever there is a malfunction with the electric power steering.
If this occurs, have the vehicle inspected by an authorized HYUNDAI dealer.
read more