Hyundai Santa Fe: Front seats / Seat cushion extension adjustment (for driver's seat)

Hyundai Santa Fe (TM) 2019-2025 Owner's Manual / Seats & Safety System / Seats / Front seats / Seat cushion extension adjustment (for driver's seat)

To move the front part of cushion forward:

1. Push the front part of control switch to move the seat cushion to the desired length.

2. Release the switch once the seat cushion reaches the desired length.

To move the front part of cushion rearward:

1. Push the rear part of control switch to move the seat cushion to the desired length.

2. Release the switch once the seat cushion reaches the desired length.

Lumbar support (for driver’s seat, if equipped)

To adjust the lumbar support:

1. Press the front portion of the switch (1) to increase support or the rear portion of the switch (2) to decrease support.

2. Press switch (3) or (4) to move the support position up or down.

3. Release the switch once the lumbar support reaches the desired position.

Power adjustment

The front seat can be adjusted by using the control switches located on the outside of the seat cushion. Before driving, adjust the seat to the proper position so that you can easily control the steering wheel, foot pedals and controls on the instrument panel...

Seatback pocket

The seatback pocket is provided on the back of the front seatbacks. CAUTION Do not put heavy or sharp objects in the seatback pockets. In an accident they could come loose from the pocket and injure occupants...

Other information:

Hyundai Santa Fe (TM) 2019-2025 Owner's Manual: Front Seat Belt – Driver’s 3point system with emergency locking retractor

To fasten your seat belt: Pull it out of the retractor and insert the metal tab (1) into the buckle (2). There will be an audible “click” when the tab locks into the buckle. You should place the lap belt (1) portion across your hips and the shoulder belt (2) portion across your chest...

Hyundai Santa Fe (TM) 2019-2025 Service Manual: Description and operation

Description System Overview The System offers the following features: – Changing the state of engine ignition and power by using the start button. – Controlling external relays for ACC / IGN1 / IGN2 terminal switching and STARTER, without use of mechanical ignition switch...