Hyundai Santa Fe: Air conditioning System / Description and operation

Hyundai Santa Fe (TM) 2019-2025 Service Manual / Heating,Ventilation And Air Conditioning / Air conditioning System / Description and operation

Refrigeration Cycle

General safety information and caution

Instructions (R-134a) When Handling Refrigerant 1. R-134a liquid refrigerant is highly volatile. A drop on the skin of your hand could result in localized frostbite...

Components and components location

Component Location Index Engine Room 1. Service port (High pressure) 2. A/C pressure transducer (APT) 3. Service port (Low pressure) 4...

Other information:

Hyundai Santa Fe (TM) 2019-2025 Service Manual: Seat Heater (Non-Air Ventilation). Repair procedures

Inspection Driver/Passenger 1. Check for continuity and measure the resistance between terminals. No. Description No. Description 1 Heater (+) 3 NTC (-) 2 NTC (+) 4 Heater (-) Driver/Passenger Fabric(± 5%) Leather(± 5%) High 2...

Hyundai Santa Fe (TM) 2019-2025 Service Manual: Repair procedures

Inspection Throttle Position Sensor (TPS) 1. Connect the diagnostic tool on the Data Link Connector (DLC). 2. Start the engine and measure the output voltage of TPS 1 and 2 at C...

Categories

Air bag collision sensors

WARNING

To reduce the risk of an air bag deploying unexpectedly and causing serious injury or death:

Do not hit or allow any objects to impact the locations where air bags or sensors are installed. Do not perform maintenance on or around the air bag sensors. If the location or angle of the sensors is altered, the air bags may deploy when they should not or may not deploy when they should. Installing bumper guards with nongenuine Hyundai or non-equivalent parts may adversely affect the collision and airbag deployment performance. Press the Engine Start/Stop button to the OFF or ACC position and wait for 3 minutes when the vehicle is being towed to prevent inadvertent air bag deployment. Have all air bag repairs performed by an authorized HYUNDAI dealer.