Hyundai Santa Fe: Emergency situations / Hazard warning flasher
.png)
The hazard warning flasher serves as a warning to other drivers to exercise extreme
caution when approaching, overtaking, or passing your vehicle.
It should be used whenever emergency repairs are being made or when the vehicle
is stopped near the edge of a roadway.
To turn the hazard warning flasher on or off, press the hazard warning flasher
button with the Engine Start/Stop button in any position. The hazard warning flasher
button is located in the center fascia panel. All turn signal lights will flash
simultaneously.
- The hazard warning flasher operates regardless of whether your vehicle
is running or not.
- The turn signals do not work when the hazard flasher is on.
If the engine stalls while driving
Reduce your speed gradually, keeping a straight line. Move cautiously
off the road to a safe place.
Turn on your hazard warning flasher...
Other information:
Specifications
Items
Specifications
Rated voltage
DC 12V
Operating voltage
DC 9 - 16V
Operating temperature
-30°C to 85°C (-22°F to 185°F)
Parastic current
Keyless type : 5...
If your vehicle comes with roof side rails, then roof side rails crossbars can
be installed on top of your vehicle.
The roof side rails crossbars are an accessory and are available at your HYUNDAI
dealer.
NOTICE
If the vehicle is equipped with a sunroof, be sure not to position cargo onto
the roof side rails in such a way that it could interfere with sunroof operation...
Categories
Electric Power Steering (EPS) warning light
.png)
This warning light illuminates:
When you set the ignition switch or the Engine Start/Stop button to
the ON position.
- The electric power steering warning light illuminates for about 3 seconds
and then goes off.
Whenever there is a malfunction with the electric power steering.
If this occurs, have the vehicle inspected by an authorized HYUNDAI dealer.
read more