Hyundai Santa Fe: Fuses And Relays / ICM (Integrated Circuit Module) Relay Box. Repair procedures

Hyundai Santa Fe (TM) 2019-2025 Service Manual / Body Electrical System / Fuses And Relays / ICM (Integrated Circuit Module) Relay Box. Repair procedures

Inspection

Power Child Lock

Check for continuity between the terminals.

1.	There should be continuity between the No.15 and No.7,8 terminals when power and ground are connected to the No.15 and No.14 in the ICM-A.

2.	There should be continuity between the No.10 and No.12,13 terminals when power and ground are connected to the No.15 and No.14 in the ICM-A.

Power Child Unlock

Check for continuity between the terminals.

1.	There should be continuity between the No.11 and No.12,13 terminals when power and ground are connected to the No.11 and No.1 in the ICM-A.

2.	There should be continuity between the No.10 and No.7,8 terminals when power and ground are connected to the No.11 and No.11 in the ICM-A.

ICM (Integrated Circuit Module) Relay Box. Description and operation

Description The ICM relay is united with (rear wiper relay, seat heater relay(front/rear), head lamp washer relay and rear A/C relay) which installed inside the lower crash pad...

Indicators And Gauges

Other information:

Hyundai Santa Fe (TM) 2019-2025 Owner's Manual: Precautions while using the head-up display

It may sometimes be difficult to read information on the Head-Up Display in the following situations. - The driver is improperly positioned in the driver’s seat - The driver wears polarizing-filter sunglasses - An object is located above the head-up display cover - The vehicle is driven on a wet road - Any improper lighting accessory is installed inside the vehicle, or there is incoming light from outside of the vehicle - The driver wears glasses - The driver wears contact lenses When it is difficult to read the Head- Up Display information, adjust the image height or brightness level from the Settings menu in the infotainment system screen...

Hyundai Santa Fe (TM) 2019-2025 Service Manual: Specifications

Specifications Tightening Torques Items N.m Kgf.m lb-ft Transfer assembly mounting bolts 60.8 - 65.7 6.2 - 6.7 44.8 - 48.5 4WD ECM mounting nuts 9...