Hyundai Santa Fe: Hydraulic System / Line Pressure Control Solenoid Valve (LINE_VFS). Components and components location

Hyundai Santa Fe (TM) 2019-2024 Service Manual / Automatic Transaxle System (SBC) / Hydraulic System / Line Pressure Control Solenoid Valve (LINE_VFS). Components and components location

Component Location (1)_Valve Body Cover

1. Valve Body Cover
2. Valve Body Cover Gasket
3. Solenoid Valve Connector

Component Location (2)_Solenoid Valve

1. 26 Brake Control Solenoid Valve
2. 35R Clutch Control Solenoid Valve
3. Underdrive Brake Control Solenoid Valve
4. Overdrive Clutch Control Solenoid Valve
5. ON/OFF Solenoid Valve
6. Torque Converter Control Solenoid Valve (Damper Clutch Control Solenoid Valve)
7. Line Pressure Control Solenoid Valve
8. Support Bracket (Direct Control Solenoid Valve)
9. Support Bracket (Indirect Control Solenoid Valve)
10. Roller

    Line Pressure Control Solenoid Valve (LINE_VFS). Description and operation

    Description • Line pressure control solenoid valve is attached to the valve body. • This variable force solenoid valve indirectly controls the hydraulic pressure inside the line pressure...

    Line Pressure Control Solenoid Valve (LINE_VFS). Specifications

    Specifications ▷ Control type : Normally high type Shape Items Specifications Control current [mA] 0 - 850 Supply pressure [kpa (kgf/cm², psi)] 539...

    Other information:

    Hyundai Santa Fe (TM) 2019-2024 Service Manual: Steering Column Shroud Panel. Repair procedures


    Replacement [Steering column shroud upper panel]    • Put on gloves to prevent hand injuries.    • When removing with a flat-tip screwdriver or remover, wrap protective tape around the tools to prevent damage to components...

    Hyundai Santa Fe (TM) 2019-2024 Service Manual: Side Impact Sensor (SIS). Repair procedures


    Removal    • Removal of the airbag must be performed according to the precautions/procedures described previously. • Do not turn the ignition switch ON and do not connect the battery cable while replacing the side impact sensor...

    Categories

    Air bag collision sensors

    WARNING

    To reduce the risk of an air bag deploying unexpectedly and causing serious injury or death:

    Do not hit or allow any objects to impact the locations where air bags or sensors are installed. Do not perform maintenance on or around the air bag sensors. If the location or angle of the sensors is altered, the air bags may deploy when they should not or may not deploy when they should. Installing bumper guards with nongenuine Hyundai or non-equivalent parts may adversely affect the collision and airbag deployment performance. Press the Engine Start/Stop button to the OFF or ACC position and wait for 3 minutes when the vehicle is being towed to prevent inadvertent air bag deployment. Have all air bag repairs performed by an authorized HYUNDAI dealer.

    read more


     
    Copyright © 2024 www.hsafe4.com