Hyundai Santa Fe: Hydraulic System / Line Pressure Control Solenoid Valve (LINE_VFS). Specifications
▷ Control type : Normally high type
Shape
|
Items
|
Specifications
|
|
Control current [mA]
|
0 - 850
|
Supply pressure [kpa (kgf/cm², psi)]
|
539.36 (5.5, 78.23)
|
Control pressure [kpa (kgf/cm², psi)]
|
0 - 519.75 (0 - 5.3, 0 - 75.38)
|
Internal
resistance(Ω)
|
4.8 - 5.4
|
Component Location (1)_Valve
Body Cover
1. Valve Body
Cover
2. Valve Body Cover Gasket
3. Solenoid Valve Connector
Component Location (2)_Solenoid
Valve
1...
Inspection
•
Refer to the DTC manual for the check procedure...
Other information:
Replacement
•
Put on gloves to protect your hands.
•
When prying with a flat-tip screwdriver, wrap it with protective
tape, and apply protective tape around the related parts, to
prevent damage...
Inspection
1.
Check the signal waveform of the CMPS and CKPS using the diagnostic
tool.
Specification : Refer to "DTC Diagnostic Guide"
Removal
•
DON’T remove the camshaft position sensor during engine running
or right after engine stops, or a scald by the flowed out engine
oil may occur...
Categories
Engine oil pressure warning light
This warning light illuminates:
When the engine oil pressure is low.
If the engine oil pressure is low:
1. Drive carefully to the nearest safe location and stop your vehicle.
2. Turn the engine off and check the engine oil level (For more details, refer
to “Engine Oil” section in chapter 9). If the level is low, add oil as required.
read more