Hyundai Santa Fe: Seat Electrical / Seat Heater (Air Ventilation). Repair procedures
Front Seat
1. |
Check for continuity and measure the resistance between terminals.
No.
|
Description
|
No.
|
Description
|
1
|
Heater (+)
|
3
|
NTC (-)
|
2
|
NTC (+)
|
4
|
Heater (-)
|
Driver/Passenger
|
Fabric(± 5%)
|
Leather(± 5%)
|
High
|
2.56 kΩ
|
1.84 kΩ
|
Middle
|
3.77 kΩ
|
3.22 kΩ
|
Low
|
5.43 kΩ
|
5kΩ
|
|
2. |
Operate the seat heater after connecting the connector, and then check
the thermostat by measuring the temperature of seat surface.
Driver/Passenger
|
Fabric(± 2%)
|
Leather(± 2%)
|
High
|
42/50 °C
|
42/50 °C
|
Middle
|
39/45 °C
|
39/45 °C
|
Low
|
36/40 °C
|
36/40 °C
|
|
Other information:
Removal
1.
Loosen the wheel nuts slightly.
Raise the vehicle, and make sure it is securely supported.
2.
Remove the rear wheel and tire (A) from rear hub.
Tightening torque :
107...
Downhill Brake Control (DBC) indicator light
This indicator light illuminates:
When you set the ignition switch or the Engine Start/Stop button to
the ON position.
- The downhill brake control indicator light illuminates for about 3 seconds
and then goes off...
Categories
The front seat can be adjusted by using the control switches located on the outside
of the seat cushion. Before driving, adjust the seat to the proper position so that
you can easily control the steering wheel, foot pedals and controls on the instrument
panel.
WARNING
NEVER allow children in the vehicle unattended. The power seats are operable
when the vehicle is turned off.
read more