Hyundai Santa Fe: Parking Safety / System malfunction and precautions
System malfunction
After starting the engine, a beep will sound when the gear is shifted to R (Reverse)
to indicate the system is operating normally.
However, if one or more of the following occurs, first check whether the ultrasonic
sensor is damaged or blocked with foreign material. If it still does not work properly,
we recommend that the system be inspected by an authorized HYUNDAI dealer.
- The audible warning does not sound.
- The buzzer sounds intermittently.
- The ‘Parking sensor error or blockage’ warning message appears on the
cluster.
WARNING
- Reverse Parking Distance Warning is a supplemental system. The operation
of the system can be affected by several factors (including environmental conditions).
It is the responsibility of the driver to always check the rear view before
and while parking.
- Your new vehicle warranty does not cover any accidents or damage to
the vehicle due to the malfunction of Reverse Parking Distance Warning.
- Pay close attention when driving near objects, pedestrians, and especially
children. Some objects may not be detected by the ultrasonic sensors, due to
the objects distance, size or material, all of which can limit the effectiveness
of the sensor.
Limitations of the system
- Reverse Parking Distance Warning may not operate normally when:
-- Moisture is frozen to the sensor
-- Sensor is covered with foreign material, such as snow or water (The system
will operate normally when such foreign material are removed.)
-- The weather is extremely hot or cold
-- The sensor or sensor assembly is disassembled
-- The surface of the sensor has been subjected to a hard impact
-- The surface of the sensor has been scratched with a sharp object
-- The sensors or its surrounding area is directly sprayed with high pressure
washer • Reverse Parking Distance Warning may malfunction when:
-- Heavy rain or water spray is present
-- Water flows on the surface of the sensor
-- Affected by another vehicle’s sensors
-- The sensor is covered with snow
-- Driving on uneven road, gravel roads or bushes
-- Objects that generates ultrasonic waves are near the sensor
-- Installing the license plate differently from the original location
-- The vehicle bumper height or ultrasonic sensor installation has been modified
-- Attaching equipments or accessories around the ultrasonic sensors
- The following objects may not be detected:
-- Sharp or slim objects, such as ropes, chains or small poles.
-- Objects, which tend to absorb sensor frequency, such as clothes, spongy material
or snow.
-- Objects smaller than 40 in. (100 cm) in length and narrower than 6 in. (14
cm) in diameter.
-- Pedestrians, animals or objects that are very close to the ultrasonic sensors
- Parking Distance Warning Indicators may be displayed differently from
the actual detected location when the obstacle is located between the sensors.
- Parking Distance Warning indicator may not occur sequentially depending
on vehicle speed or obstacle shape.
- If Reverse Parking Distance Warning needs repair, we recommend that the
system be inspected by an authorized HYUNDAI dealer.
Operating button
Parking Distance Warning Off button
Press the Parking Distance Warning Off ()
button to turn off Reverse Parking Distance Warning...
Forward/Reverse Parking Distance Warning will help warn the driver if an obstacle
is detected within a certain distance when the vehicle is moving forward or in reverse
at low speeds...
Other information:
General
The supplemental restraint system (SRS) is designed to supplement the seat belt
to help reduce the risk or severity of injury to the driver and passenger by
activating and deploying the driver, passenger, side airbag and belt pretensioner
in certain frontal or side collisions...
Description
The PTC (Positive Temperature Coefficient) heater is installed at the exit or
the backside of the heater core.
The PTC heater is an electric heater using a PTC element as an auxiliary heating
device that supplements deficiency of interior heat source in highly effective
diesel engine...
Categories
The front seat can be adjusted by using the control switches located on the outside
of the seat cushion. Before driving, adjust the seat to the proper position so that
you can easily control the steering wheel, foot pedals and controls on the instrument
panel.
WARNING
NEVER allow children in the vehicle unattended. The power seats are operable
when the vehicle is turned off.
read more