Hyundai Santa Fe: Tail Gate / Tail Gate Trim. Repair procedures

Hyundai Santa Fe (TM) 2019-2024 Service Manual / Body (Interior and Exterior) / Tail Gate / Tail Gate Trim. Repair procedures

Replacement
[Tailgate lower trim]
  
Put on gloves to prevent hand injuries.
  
When removing with a flat-tip screwdriver or remover, wrap protective tape around the tools to prevent damage to components.
Take care not to scratch the body surface.
1.
Remove the tailgate upper & lower trim.
(Refer to Tailgate - "Liftgate Trim")
2.
Using a screwdriver or remover, remove the pull handle (A).

3.
Using a screwdriver or remover, remove the PTG switch (A).

4.
After loosening the mounting screws and fastner remove the tailgate lower trim (A).

5.
To install, reverse removal procedure.
  
Replace any damaged clips.
[Tailgate upper trim]
  
Put on gloves to prevent hand injuries.
  
When removing with a flat-tip screwdriver or remover, wrap protective tape around the tools to prevent damage to components.
Take care not to scratch the body surface.
1.
Using a screwdriver or remover, remove the tailgate upper trim (A).

2.
To install, reverse removal procedure.
  
Replace any damaged clips (or pin-type retainers).
[Tailgate side trim]
  
Put on gloves to prevent hand injuries.
  
When removing with a flat-tip screwdriver or remover, wrap protective tape around the tools to prevent damage to components.
Take care not to scratch the body surface.
1.
Remove the tailgate upper trim.
(Refer to Tailgate - "Liftgate Trim")
2.
Using a screwdriver or remover, remove the side trim (A).
[LH]

[RH]

3.
To install, reverse removal procedure.
  
Replace any damaged clips (or pin-type retainers).

    Tail Gate Trim. Components and components location

    ..

    Tail Gate Lift. Repair procedures

    Replacement    • Take care to not let the tailgate fall on you as the lifts are removed...

    Other information:

    Hyundai Santa Fe (TM) 2019-2024 Service Manual: Main Crash Pad Assembly. Repair procedures


    Replacement    • Put on gloves to prevent hand injuries.    • When removing with a flat-tip screwdriver or remover, wrap protective tape around the tools to prevent damage to components...

    Hyundai Santa Fe (TM) 2019-2024 Service Manual: Front Bumper Beam Assembly. Components and components location


    ..

    Categories

    Vehicle Identification Number (VIN). Vehicle certification label. Tire specification and pressure label

    Vehicle Identification Number (VIN)

    The vehicle identification number (VIN) is the number used in registering your vehicle and in all legal matters pertaining to its ownership, etc.

    The number is punched on the floor under the passenger seat. To check the number, open the cover.

    read more


     
    Copyright © 2024 www.hsafe4.com