Hyundai Santa Fe: Tires and wheels / Tire care

Hyundai Santa Fe (TM) 2019-2024 Owner's Manual / Maintenance / Tires and wheels / Tire care

For proper maintenance, safety, and maximum fuel economy, you must always maintain recommended tire inflation pressures and stay within the load limits and weight distribution recommended for your vehicle.

All specifications (sizes and pressures) can be found on a label attached to the driver’s side center pillar.

Tires and wheels

WARNING Tire failure may cause loss of vehicle control resulting in an accident. To reduce risk of SERIOUS INJURY or DEATH, take the following precautions: Inspect your tires monthly for proper inflation as well as wear and damage...

Recommended cold tire inflation pressures

All tire pressures (including the spare) should be checked when the tires are cold. “Cold tires” means the vehicle has not been driven for at least three hours or driven less than 1 mile (1...

Other information:

Hyundai Santa Fe (TM) 2019-2024 Owner's Manual: Four wheel drive (4WD)

Four Wheel Drive (4WD) delivers engine power to front and rear wheels for maximum traction. 4WD is useful when extra traction is required, such as when driving on, muddy, wet, or snow-covered roads. WARNING To reduce the risk of SERIOUS INJURY or DEATH: Do not drive in conditions that exceed the vehicles intended design such as challenging off-road conditions...

Hyundai Santa Fe (TM) 2019-2024 Service Manual: CVVT (Continuously Variable Valve Timing) System. Description and operation

Description Continuous Variable Valve Timing (CVVT) system advances or retards the valve timing of the intake and exhaust valve in accordance with the ECM control signal which is calculated by the engine speed and load. By controlling CVVT, the valve over-lap or under-lap occurs, which makes better fuel economy and reduces exhaust gases (NOx, HC) and improves engine performance through reduction of pumping loss, internal EGR effect, improvement of combustion stability, improvement of volumetric efficiency, and increase of expansion work...