Hyundai Santa Fe: Steering System / Troubleshooting

Hyundai Santa Fe (TM) 2019-2024 Service Manual / Steering System / Troubleshooting

Troubleshooting
Symptom
Probable cause
Remedy
Play in steering
 Loose yoke plug
 Retighten
Loose steering gear mounting bolts
 Retighten
Loose or worn tie rod end
 Retighten or replace as necessary
Steering wheel does not return properly
 Excessive turning resistance of tie rod end
 Replace
Yoke plug excessively tight
 Adjust
Tie rod and/or ball joint cannot turn smoothly
 Replace
Loose mounting of gear box mounting bracket Worn steering shaft joint and/or
 Retighten
Worn steering shaft joint and / or body grommet
 Correct or replace
Distorted rack
 Replace
Damaged pinion bearing
 Replace
Twisted or damaged hoses
 Reposition or replace
Damaged oil pressure control valve
 Replace
Damaged oil pump input shaft bearing
 Replace
Rattling or chucking noise in the rack and pinion
 Interference with hoses from vehicle body
 Reposition
Loose gear box bracket
 Retighten
Loose tie rod end and / or ball joint
 Retighten
Worn tie rod and / or ball joint
 Replace

    Special service tools

    ..

    Repair procedures

    Service Adjustment Procedure Steering Wheel Play Inspection 1. Turn the steering wheel so that the front wheels can face straight ahead...

    Other information:

    Hyundai Santa Fe (TM) 2019-2024 Service Manual: A/C Pressure Transducer. Description and operation


    Description The A/C Pressure Transducer (APT) converts the pressure value of high pressure line into voltage value after measuring it. By converted voltage value, engine ECU controls the cooling fan by operating it high speed or low speed...

    Hyundai Santa Fe (TM) 2019-2024 Service Manual: Accelerator Pedal. Repair procedures


    Removal 1. Turn the ignition switch OFF and disconnect the battery (-) terminal. 2. Disconnect the accelerator position snesor connector (A). 3. Disconnect the mounting cap (A)...

    Categories

    Engine oil pressure warning light. Low fuel level warning light

    Engine oil pressure warning light

    This warning light illuminates:

    When the engine oil pressure is low.

    If the engine oil pressure is low:

    1. Drive carefully to the nearest safe location and stop your vehicle.

    2. Turn the engine off and check the engine oil level (For more details, refer to “Engine Oil” section in chapter 9). If the level is low, add oil as required.

    read more


     
    Copyright © 2024 www.hsafe4.com