Hyundai Santa Fe: Exhaust Emission Control System / Catalytic Converter. Repair procedures

Hyundai Santa Fe (TM) 2019-2024 Service Manual / Emission Control System / Exhaust Emission Control System / Catalytic Converter. Repair procedures

Removal
[Catalytic Converter (WCC)]
1.
Remove the exhaust manifold.
(Refer to Engine Mechanical System - "Exhaust Manifold")
[Catalytic Converter (UCC)]
1.
Remove the Center Muffler.
(Refer to Engine Mechanical System - "Center Muffler")
Installation
1.
Install in the reverse order of removal.

    Catalytic Converter. Description and operation

    Description The catalytic converter of the gasoline engine is a three way catalyst. It oxidizes carbon monoxide and hydrocarbons (HC), and separates oxygen from the oxides of nitrogen (NOx)...

    CVVT (Continuously Variable Valve Timing) System. Description and operation

    Description Continuous Variable Valve Timing (CVVT) system advances or retards the valve timing of the intake and exhaust valve in accordance with the ECM control signal which is calculated by the engine speed and load...

    Other information:

    Hyundai Santa Fe (TM) 2019-2024 Service Manual: Torque Converter Control Solenoid Valve (T/CON_VFS). Description and operation


    Description • Torque converter control solenoid valve (T/CON_VFS) is attached to the valve body. • This variable force solenoid valve indirectly controls the hydraulic pressure inside the torque converter...

    Hyundai Santa Fe (TM) 2019-2024 Owner's Manual: Vehicle Identification Number (VIN). Vehicle certification label. Tire specification and pressure label


    Vehicle Identification Number (VIN) The vehicle identification number (VIN) is the number used in registering your vehicle and in all legal matters pertaining to its ownership, etc. The number is punched on the floor under the passenger seat. To check the number, open the cover...

    Categories

    Engine oil pressure warning light. Low fuel level warning light

    Engine oil pressure warning light

    This warning light illuminates:

    When the engine oil pressure is low.

    If the engine oil pressure is low:

    1. Drive carefully to the nearest safe location and stop your vehicle.

    2. Turn the engine off and check the engine oil level (For more details, refer to “Engine Oil” section in chapter 9). If the level is low, add oil as required.

    read more


     
    Copyright © 2024 www.hsafe4.com