Hyundai Santa Fe: Hydraulic System / Valve Body. Components and components location
1. Solenoid valve
support bracket
2. Solenoid valve support bracket (Directly solenoid)
3. Line Pressure Control Solenoid Valve
4. Torque Convert Control Solenoid Valve (T/CON)
5. ON/OFF solenoid valve
6. Overdrive Clutch Control Solenoid Valve (OD/C)
|
7. Underdrive
Brake Control Solenoid Valve (UD/B)
8. 35R Clutch Control Solenoid Valve (35R/C)
9. 26 Brake Control Solenoid Valve (26B)
10. LR/B pressure flow hole
11. UD/B pressure flow hole
12. Accumulator
|
Description
•
The valve body is essential to automatic transaxle control and consists
of various valves used to control the oil feed from the oil pump...
Removal
•
Be careful not to damage the parts located under the vehicle
(floor under cover, fuel filter, fuel tank and canister) when
raising the vehicle using the lift...
Other information:
Description
The Side Impact Sensor (SIS) system consists of two kinds of side impact sensor
which are installed at each center of the front door module (left and right)
and two rear sensors which are installed in the rear pillar (left and right)...
The USB charger is designed to recharge batteries of small size electrical devices
using a USB cable.
The electrical devices can be recharged when the Engine Start/Stop button is
in the ACC or ON (or START) position.
The battery charging state may be monitored on the electrical device...
Categories
1. Driver’s front air bag
2. Passenger’s front air bag
3. Side air bag
4. Curtain air bag
The vehicles are equipped with a Supplemental Air Bag System for the driver’s
seat and front passenger’s seats.
The front air bags are designed to supplement the three-point seat belts. For
these air bags to provide protection, the seat belts must be worn at all times when
driving.
read more