Hyundai Santa Fe: Hydraulic System / Valve Body. Description and operation
• |
The valve body is essential to automatic transaxle control and consists
of various valves used to control the oil feed from the oil pump. Specifically,
these valves consist of pressure regulator valves, oil redirection valves,
shift valves, and manual valves.
|
• |
The body also features electronic solenoid valves that ensure smooth
gear changes.
|
Description
•
The hydraulic system consists of a valve body, an oil filter and an
oil pump.
•
The oil pump is powered by the engine...
Components Location
1. Solenoid valve
support bracket
2. Solenoid valve support bracket (Directly solenoid)
3. Line Pressure Control Solenoid Valve
4...
Other information:
Instrument panel illumination
When the vehicle’s parking lights or headlights are on, press the illumination
control switch to adjust the brightness of the instrument panel illumination.
When pressing the illumination control switch, the interior switch illumination
intensity also adjusted...
Operating conditions
If ‘Rear Active Assist’ or ‘Rear Warning Only’ is set from the Settings menu,
Reverse Parking Collision-Avoidance Assist will be in the ready status when the
following conditions are satisfied:
-- The liftgate is closed
-- The gear is shifted to R (Reverse)
-- Vehicle speed is below 6 mph (10 km/h)
-- System components such as the rear view camera and the rear ultrasonic sensors
are in normal conditions
When Reverse Parking Collision- Avoidance Assist activates, a line appears behind
the vehicle image in the instrument cluster...
Categories
The front seat can be adjusted by using the control switches located on the outside
of the seat cushion. Before driving, adjust the seat to the proper position so that
you can easily control the steering wheel, foot pedals and controls on the instrument
panel.
WARNING
NEVER allow children in the vehicle unattended. The power seats are operable
when the vehicle is turned off.
read more