Hyundai Santa Fe: Engine Control System / Variable Intake Solenoid (VIS) Valve. Specifications
Hyundai Santa Fe (TM) 2019-2025 Service Manual / Engine Control/Fuel System / Engine Control System / Variable Intake Solenoid (VIS) Valve. Specifications
| Specification |
|
Item |
Specification |
|
Coil resistance (Ω) |
30.0 - 35.0 [20°C (68°F)] |
Variable Intake Solenoid (VIS) Valve. Description and operation
Description
Variable Intake manifold Solenoid (VIS) valve is installed on the intake manifold.
The VIS valve controls the vacuum modulator which activates a valve in the intake
manifold...
Other information:
Hyundai Santa Fe (TM) 2019-2025 Service Manual: Manifold Absolute Pressure Sensor (MAPS). Repair procedures
Inspection 1. Connect the diagnostic tool on the Data Link Connector (DLC). 2. Measure the output voltage of the MAPS at idle and IG ON. Specification : Refer to "Specification" Removal 1...
Hyundai Santa Fe (TM) 2019-2025 Service Manual: Components and components location
Components [2WD] 1. Rear shock absorber 2. Rear lower arm 3. Rear stabilizer bar 4. Rear cross member 5. Rear upper arm 6. Rear assist arm 7. Trailing arm [4WD] 1...
Categories
- Manuals Home
- 4th Generation Santa Fe Owners Manual
- 4th Generation Santa Fe Service Manual
- Resetting the power liftgate
- Side air bags
- Smart liftgate
- New on site
- Most important about car
Engine oil pressure warning light. Low fuel level warning light
Engine oil pressure warning light
.png)
This warning light illuminates:
When the engine oil pressure is low.
If the engine oil pressure is low:
1. Drive carefully to the nearest safe location and stop your vehicle.
2. Turn the engine off and check the engine oil level (For more details, refer to “Engine Oil” section in chapter 9). If the level is low, add oil as required.
Copyright © 2025 www.hsafe4.com