Hyundai Santa Fe: ESP(Electronic Stability Program) System / ESP OFF Switch. Description and operation
1. |
The ESP OFF switch is for the user to turn off the ESP system.
|
2. |
The ESP OFF lamp is on when ESP OFF switch is engaged.
|
Removal
1.
Turn ignition switch OFF and disconnect the negative (-) battery cable.
2.
Pull up the lock of the HECU connector and then disconnect the connector
(A)...
Removal
1.
Turn ignition switch OFF and disconnect the negative (-) battery cable.
2.
Remove the crash pad lower panel...
Other information:
Variant Coding
When you need variant coding:
–
Replace Front View Camera with a new one
※ EOL Variant Coding and calibration required for new replacement
Front View Camera Variant Coding
Front view camera variant coding makes it possible to operate functions for
each vehicle type...
Description
The SRSCM monitors the status of the driver and front passenger seat belt buckle.
The SRSCM provides one pin each for the driver and front passenger seat belt
buckle status input. The seat belt buckle circuit operates from internal boost
voltage supplied by the SRSCM, and uses chassis ground for the signal return...
Categories
Engine oil pressure warning light
This warning light illuminates:
When the engine oil pressure is low.
If the engine oil pressure is low:
1. Drive carefully to the nearest safe location and stop your vehicle.
2. Turn the engine off and check the engine oil level (For more details, refer
to “Engine Oil” section in chapter 9). If the level is low, add oil as required.
read more