Hyundai Santa Fe: Indicators And Gauges / Instrument Cluster. Schematic diagrams
Hyundai Santa Fe (TM) 2019-2024 Service Manual / Body Electrical System / Indicators And Gauges / Instrument Cluster. Schematic diagrams
| Circuit Diagram |
MONO TFT LCD 3.5 Inch
TFT LCD 4.2 Inch
Color 12.3 Inch
Instrument Cluster. Components and components location
Components
MONO TFT LCD 3.5 Inch
TFT LCD 4.2 Inch
Color 12.3 Inch
Connector Pin Information
No...
Instrument Cluster. Repair procedures
Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the cluster fascia panel (A)...
Other information:
Hyundai Santa Fe (TM) 2019-2024 Service Manual: Front Wheel Guard. Repair procedures
Replacement • When removing with a flat-tip screwdriver or remover, wrap protective tape around the tools to prevent damage to components...
Hyundai Santa Fe (TM) 2019-2024 Owner's Manual: Temperature control. Air intake control
Temperature control The temperature will increase by turning the knob to the right. The temperature will decrease by turning the knob to the left. Air intake control This is used to select outside (fresh) air position or recirculated air position. To change the air intake control position, press the control button...
Categories
- Manuals Home
- 4th Generation Santa Fe Owners Manual
- 4th Generation Santa Fe Service Manual
- Repair procedures
- Rear Occupant Alert (ROA)
- Electronic Parking Brake (EPB) warning light. AUTO HOLD indicator light
- New on site
- Most important about car
Engine oil pressure warning light. Low fuel level warning light
Engine oil pressure warning light
.png)
This warning light illuminates:
When the engine oil pressure is low.
If the engine oil pressure is low:
1. Drive carefully to the nearest safe location and stop your vehicle.
2. Turn the engine off and check the engine oil level (For more details, refer to “Engine Oil” section in chapter 9). If the level is low, add oil as required.
Copyright © 2024 www.hsafe4.com