Hyundai Santa Fe: Front View Camera System / Lane Safety Button. Repair procedures
1. |
Disconnect the negative (-) battery terminal.
|
2. |
Remove the crash pad lower pannel.
(Refer to Body - "Crash Pad Lower Panel")
|
3. |
Loosen the mounting screw and remove the crash pad garnish [LH] (A).

|
4. |
Disconnect the crash pad garnish [LH] connector (A).

|
5. |
Loosen the mounting screws and remove the crash pad lower switch (A).

|
1. |
Install the crash pad lower panel switch.
|
2. |
Install the crash pad lower panel.
|
3. |
Connect the negative (-) battery terminal.
|
Other information:
Operating conditions
Smart Cruise Control will operate when the following conditions are satisfied.
Basic function
The gear is in D (Drive)
The driver’s door is closed
EPB (Electronic Parking Brake) is not applied
Your vehicle speed is within the operating speed range
-- 5~110 mph (10~180 km/h): when there is no vehicle in front
-- 0~110 mph (0~180 km/h): when there is a vehicle in front
ESC (Electronic Stability Control), TCS (Traction Control System) or ABS
is on
ESC (Electronic Stability Control), TCS (Traction Control System) or ABS
is not controlling the vehicle
Engine rpm is not in the red zone
Forward Collision-Avoidance Assist brake control is not operating
Remote Smart Parking Assist brake control is not operating
Information
At a stop, if there is no vehicle in front of your vehicle, the system will
turn on when the brake pedal is depressed...
Drive mode may be selected according to the driver's preference or road condition.
Drive mode
The mode changes whenever the DRIVE MODE knob is rotated.
COMFORT mode
COMFORT mode provides smooth driving and comfortable riding.
SPORT mode
SPORT mode provides sporty but firm riding...
Categories

The armrest is located in the center of the rear seat. Pull the armrest down
from the seatback to use it.
read more