Hyundai Santa Fe: Rear Door / Rear Door Side Weatherstrip. Repair procedures

Replacement

[Rear door side weatherstrip]

Loosen the rear door checker (B) mounting bolt.

Tightening torque :

21.6 - 32.4 N.m (2.2 - 3.3 kgf.m,15.9 - 23.9 lb-ft)

2.	Detach the clips, remove the rear door side weatherstrip (A).

To install, reverse removal procedure.

•	Replace any damaged clips.

[Rear door body side weatherstrip]

1.	Detach the clips, then remove the rear door body side weatherstrip (A). [LH] [RH]

2.	To install, reverse the removal procedure.

Replacement 1. Remove the rear door trim. (Refer to Rear Door - "Rear Door Trim") 2...

Replacement • Put on gloves to prevent hand injuries...

Inspection 1. Turn the ignition switch OFF. 2. Disconnect the IATS connector. 3. Measure resistance between the IATS terminals 3 and 4. 4...

Categories