Hyundai Santa Fe: Body (Interior and Exterior) / Rear Door

Hyundai Santa Fe (TM) 2019-2025 Service Manual / Body (Interior and Exterior) / Rear Door

Front Door Frame Molding. Repair procedures

Replacement • Put on gloves to prevent hand injuries...

Components and components location

Components 1. Rear door window glass 2. Rear door window glass run assembly 3. Rear door outside handle 4. Rear door outside handle pad 5...

Other information:

Hyundai Santa Fe (TM) 2019-2025 Service Manual: Rear Stabilizer Bar. Repair procedures

Removal 1. Raise the vehicle, and make sure it is securely supported. 2. In the case of 4WD vehicle, remove the rear differential assembly. (Refer to Driveshaft and axle - "Rear Differential Carrier") 3...

Hyundai Santa Fe (TM) 2019-2025 Service Manual: Heated Oxygen Sensor (HO2S). Specifications

Specification HO2S [Bank 1 / Sensor 1] [Euro-V] Item Specification Heater Resistance (Ω) 2.5 - 4.0 [20°C (68°F)] HO2S [Bank 1 / Sensor 1] [Except Euro-V] A/F Ratio (λ) Output Voltage (V) RICH Approx...

Categories

Air bag collision sensors

WARNING

To reduce the risk of an air bag deploying unexpectedly and causing serious injury or death:

Do not hit or allow any objects to impact the locations where air bags or sensors are installed. Do not perform maintenance on or around the air bag sensors. If the location or angle of the sensors is altered, the air bags may deploy when they should not or may not deploy when they should. Installing bumper guards with nongenuine Hyundai or non-equivalent parts may adversely affect the collision and airbag deployment performance. Press the Engine Start/Stop button to the OFF or ACC position and wait for 3 minutes when the vehicle is being towed to prevent inadvertent air bag deployment. Have all air bag repairs performed by an authorized HYUNDAI dealer.