Hyundai Santa Fe: Airbag Module / Side Airbag (SAB) Module. Description and operation
The Side Airbags (SAB) are installed inside the front seat and protects the
driver and passenger from danger when a side crash occurs. The SRSCM determines
deployment of the side airbag by using the Side Impact Sensor (SIS) signal.
•
|
Never attempt to measure the circuit resistance of the airbag
module (squib) even if you are using a specified tester. If
the circuit resistance is measured with a tester, accidental
airbag deployment will result in serious personal injury.
|
|
Removal
1.
Disconnect the battery negative cable and wait for at least three minutes
before beginning work.
2...
Other information:
Failure Inspection
Diagnosis with diagnostic tool
1.
In the body electrical system, failure can be quickly diagnosed by using
the vehicle diagnostic system (diagnostic tool).
The diagnostic system (diagnostic tool) provides the following information...
Your vehicle is equipped with a side air bag in each front seat. The purpose
of the air bag is to provide the vehicle’s driver and the front passenger with additional
protection than that offered by the seat belt alone.
The side air bags are designed to deploy during certain side impact collisions,
depending on the crash severity, angle, speed and point of impact...
Categories
The front seat can be adjusted by using the control switches located on the outside
of the seat cushion. Before driving, adjust the seat to the proper position so that
you can easily control the steering wheel, foot pedals and controls on the instrument
panel.
WARNING
NEVER allow children in the vehicle unattended. The power seats are operable
when the vehicle is turned off.
read more