Hyundai Santa Fe: Button Engine Start System / Start/Stop Button. Repair procedures

Hyundai Santa Fe (TM) 2019-2024 Service Manual / Body Electrical System / Button Engine Start System / Start/Stop Button. Repair procedures

Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the driver crash pad lower panel.
(Refer to Body - "Crash Pad Lower Panel")
3.
Disconnect the start/stop button connector (B) after removing the center fascia garnish (A).

4.
Remove the start/stop button (A) after removing the screws (3EA).

Installation
1.
Install the start/stop button.
2.
Install the crash pad lower panel.
3.
Connect the negative (-) battery terminal.

    Start/Stop Button. Components and components location

    ..

    Ignition Switch Assembly. Repair procedures

    Inspection 1. Disconnect the ignition switch connector (B) and key warning switch connector (A) from under the steering column...

    Other information:

    Hyundai Santa Fe (TM) 2019-2024 Service Manual: Seat Heater (Air Ventilation). Components and components location


    ..

    Hyundai Santa Fe (TM) 2019-2024 Service Manual: Transfer Fluid. Repair procedures


    Inspection    • Transfer oil should be inspected and refilled every 60,000 km (40,000 mile) / 4 year.    • Be careful not to damage the parts located under the vehicle (floor under cover, fuel filter, fuel tank and canister) when raising the vehicle using the lift...

    Categories

    Vehicle Identification Number (VIN). Vehicle certification label. Tire specification and pressure label

    Vehicle Identification Number (VIN)

    The vehicle identification number (VIN) is the number used in registering your vehicle and in all legal matters pertaining to its ownership, etc.

    The number is punched on the floor under the passenger seat. To check the number, open the cover.

    read more


     
    Copyright © 2024 www.hsafe4.com