Hyundai Santa Fe: Vehicle auto-shut off / System Operation

Hyundai Santa Fe (TM) 2019-2024 Owner's Manual / Driving your vehicle / Vehicle auto-shut off / System Operation

When all the conditions are satisfied, the Vehicle Auto-Shut Off operates and turns the engine off automatically after 60 minutes.

A timer appears on the instrument cluster 30 minutes before vehicle shut off.

Resetting cluster timer

To reset the cluster timer, do one of following:

Release the accelerator pedal or brake pedal after Vehicle Auto-Shut Off is complete.
Press the OK button on the steering wheel while the timer appears on the instrument cluster.

CAUTION

Do not leave a passenger or a pet in the vehicle in hot weather since the air conditioning system turns off when the engine is off.

Vehicle auto-shut off

If your vehicle is parked and the engine is left on for a long period of time, the engine will turn off automatically to help reduce fuel consumption and prevent accidents caused by carbon dioxide poisoning...

Automatic transmission

Other information:

Hyundai Santa Fe (TM) 2019-2024 Owner's Manual: Forced to restart engine

The engine is automatically restarted in the following situations. The brake vacuum pressure is low The engine has stopped for about 5 minutes The air conditioning is ON with the fan speed set to a certain high level The front defroster is ON The battery is weak The cooling and heating performance of the climate control system is unsatisfactory The vehicle is shifted to P (Park) or R (Reverse) when Auto Hold is activated The door is opened or the seatbelt is unfastened when Auto Hold is activated The EPB switch is pressed when Auto Hold is activated The Auto Stop () indicator blinks in green for 5 seconds on the instrument cluster when the engine is restarted...

Hyundai Santa Fe (TM) 2019-2024 Owner's Manual: System malfunction and precautions

System malfunction After starting the engine, a beep will sound when the gear is shifted to R (Reverse) to indicate the system is operating normally. However, if one or more of the following occurs, first check whether the ultrasonic sensor is damaged or blocked with foreign material...