Hyundai Santa Fe: Driving Safety / Driver Attention Warning (DAW)
Basic function
Driver Attention Warning will help determine the driver's attention level by
analyzing driving pattern, driving time, etc. while vehicle is being driven. The
system will recommend a break when the driver’s attention level falls below a certain
level.
Leading Vehicle Departure Alert function
Leading Vehicle Departure Alert function will inform the driver when a detected
vehicle in front departs from a stop.
Detecting sensor
[1] : Front view camera
The front view camera is used to detect driving patterns and front vehicle departure
while vehicle is being driven.
Refer to the picture above for the detailed location of the detecting sensor.
CAUTION
Always keep the front view camera in good condition to maintain optimal performance
of Driver Attention Warning.
For more details on the precautions of the front view camera, refer to “Forward
Collision-Avoidance Assist (FCA)” section in chapter 7.
System malfunction
When Safe Exit Assist is not working properly, the ‘Check Blind-Spot Safety system(s)’
warning message will appear on the cluster, and the system will turn off automatically
or the system will be limited...
Setting functions for the system
Driver Attention Warning
With the engine on, select ‘Driver Assistance → Driver Attention Warning (or
DAW (Driver Attention Warning))’ from the Settings menu to set whether or not to
use each function...
Other information:
Operating conditions
If ‘Rear Active Assist’ or ‘Rear Warning Only’ is set from the Settings menu,
Reverse Parking Collision-Avoidance Assist will be in the ready status when the
following conditions are satisfied:
-- The liftgate is closed
-- The gear is shifted to R (Reverse)
-- Vehicle speed is below 6 mph (10 km/h)
-- System components such as the rear view camera and the rear ultrasonic sensors
are in normal conditions
When Reverse Parking Collision- Avoidance Assist activates, a line appears behind
the vehicle image in the instrument cluster...
Release Residual Pressure
in Fuel Line
•
There may be some residual pressure even after "Release Residual
Pressure in Fuel Line" work, so cover the hose connection with
a shop towel to prevent residual fuel from spilling out before
disconnecting any fuel connection...
Categories
The front seat can be adjusted by using the control switches located on the outside
of the seat cushion. Before driving, adjust the seat to the proper position so that
you can easily control the steering wheel, foot pedals and controls on the instrument
panel.
WARNING
NEVER allow children in the vehicle unattended. The power seats are operable
when the vehicle is turned off.
read more