Hyundai Santa Fe: Driver Parking Assistance System / Parking Collision-Avoidance Assist (PCA). Components and components location
Components and Components
Location |
Removal
ADAS Parking ECU (ADAS_PRK)
1.
Disconnect the negative (-) battery terminal.
2.
Remove the ADAS Parking ECU (ADAS_PRK)...
Other information:
Description
The starting system includes the battery, starter, solenoid switch, ignition
switch, ignition lock switch, connection wires and the battery cable.
When the ignition key is turned to the start position, current flows and energizes
the starter motor's solenoid coil...
Adjustment
1.
After loosening the hinge (A) mounting bolt, adjust the hood (B) by
moving it up and down or from side to side and tighten the bolt.
2.
Adjust the hood height by moving the hood overslam bumpers (C) up and
down...
Categories
WARNING
To reduce the risk of an air bag deploying unexpectedly and causing serious
injury or death:
Do not hit or allow any objects to impact the locations where air
bags or sensors are installed.
Do not perform maintenance on or around the air bag sensors. If
the location or angle of the sensors is altered, the air bags may deploy when
they should not or may not deploy when they should.
Installing bumper guards with nongenuine Hyundai or non-equivalent
parts may adversely affect the collision and airbag deployment performance.
Press the Engine Start/Stop button to the OFF or ACC position and
wait for 3 minutes when the vehicle is being towed to prevent inadvertent air
bag deployment.
Have all air bag repairs performed by an authorized HYUNDAI dealer.
read more