Hyundai Santa Fe: Heating and air conditioning / Temperature control. Air intake control
Temperature control
The temperature will increase by turning the knob to the right. The temperature
will decrease by turning the knob to the left.
Air intake control
This is used to select outside (fresh) air position or recirculated air position.
To change the air intake control position, press the control button.
Recirculated air position
With the recirculated air position selected, air from the passenger compartment
will be drawn through the heating system and heated or cooled according to the function
selected.
Outside (fresh) air position
With the outside (fresh) air position selected, air enters the vehicle from outside
and is heated or cooled according to the function selected.
Information
Using the system in the fresh air position is recommended.
Prolonged operation of the heater in the recirculated air position (without
air conditioning selected) can cause fogging of the windshield and side windows
and the air within the passenger compartment will become stale.
In addition, prolonged use of the air conditioning with the recirculated air
position selected will result in excessively dry air in the passenger compartment.
WARNING
- Continued climate control system operation in the recirculated air
position may allow humidity to increase inside the vehicle which may fog the
glass and obscure visibility.
- Do not sleep in a vehicle with the air conditioning or heating system
on. It may cause serious harm or death due to a drop in the oxygen level and/or
body temperature.
- Continued climate control system operation in the recirculated air
position can cause drowsiness or sleepiness, and loss of vehicle control. Set
the air intake control to the outside (fresh) air position as much as possible
while driving.
The mode selection button controls the direction of the air flow through the
ventilation system.
Face-Level (B, C, E)
Air flow is directed toward the upper body and face...
Fan speed control
Turn the knob to the right to increase the fan speed and airflow. Turn the knob
to the left to decrease fan speed and airflow.
Setting the fan speed control knob to the “0” position turns off the fan...
Other information:
Function Of Safety Power
Window
When driver door power window auto-up switch is operated, safety function is
activated.
1.
Safety function condition
When detect the force of 100N (using the 10N/mm spring) during the window
rising, window is reversed...
•
Put on gloves to protect your hands.
•
When prying with a flat-tip screwdriver, wrap it with protective
tape, and apply protective tape around the related parts, to
prevent damage...