Hyundai Santa Fe: Light bulbs / License plate lamp replacement
1. Using a flat-blade screwdriver, gently pry the lens cover from the lamp housing.
2. Remove the bulb by pulling it straight out.
3. Install a new bulb.
4. Reinstall in the reverse order.
If the LED lamp (1) does not operate, we recommend that the system be inspected
by an authorized HYUNDAI dealer.
The LED lamps cannot be replaced as a single unit because it is an integrated
unit...
Map lamp (LED/Bulb type), Room lamp (LED type)
If the map lamp (LED/Bulb) (1) and the room lamp (LED type) (1) do not operate,
we recommend that the system be checked by an authorized HYUNDAI dealer...
Other information:
Check the Parking Brake warning light by pressing the Engine Stop/Start button
to the ON position.
This light will be illuminated when the parking brake is applied with the Engine
Stop/Start button in the START or ON position.
Before driving, be sure the parking brake is released and the Parking Brake warning
light is OFF...
Replacement
1.
Remove the front seat belt upper anchor.
(Refer to Front Seat Belt - "Front Seat Belt Pretensioner")
2.
After loosening the mounting bolts, then remove the height adjust (A)...
Categories
WARNING
To reduce the risk of an air bag deploying unexpectedly and causing serious
injury or death:
Do not hit or allow any objects to impact the locations where air
bags or sensors are installed.
Do not perform maintenance on or around the air bag sensors. If
the location or angle of the sensors is altered, the air bags may deploy when
they should not or may not deploy when they should.
Installing bumper guards with nongenuine Hyundai or non-equivalent
parts may adversely affect the collision and airbag deployment performance.
Press the Engine Start/Stop button to the OFF or ACC position and
wait for 3 minutes when the vehicle is being towed to prevent inadvertent air
bag deployment.
Have all air bag repairs performed by an authorized HYUNDAI dealer.
read more